iRule  Universal Remote Control

Support Center

Name is required.
Email address is required.
Invalid email address
Answer is required.
Exceeding max length of 5KB

FeedBack IP Hex

Talisson Souza Oct 03, 2018 03:52PM EDT

Hello

over a multiroom via IP in hex
I have an ON command (tx) "02 04 01 01"
command: \x02\x04\x01\x01 (working!)

In the docklight, I have the feedback (rx) "02 07 81 02 07 04 01"

How to configure the feedback ??

thankful

Up 1 rated Down
iRule Support Team Oct 03, 2018 04:34PM EDT Builder & App Support Support
You need to look at what is constant and what is dynamic in that feedback.

What is the same across all the feedback that comes in from the device would be in "starts with". So if in your case, 02 is what all the feedback starts with, you would put \x02 in STARTS WITH.

Prefix is specific to the type of feedback.
Up 0 rated Down
Talisson Souza Oct 03, 2018 05:06PM EDT

02 is constant.

Prefix, something?

Sufix, something?

target, something?

ends with, something?
Up 0 rated Down
iRule Support Team Oct 03, 2018 05:21PM EDT Builder & App Support Support
Does NOT help. You NEED to know what each byte does.

You got \x02 as constant, so that is your STARTS WITH.
Up 0 rated Down
Talisson Souza Oct 03, 2018 05:41PM EDT
In the docklight, I have the feedback (rx) "02 07 81 02 07 04 01" = POWER ON

In the docklight, I have the feedback (rx) "02 07 81 02 07 04 00" = POWER OFF

It's helps?

Thanksful
Up 0 rated Down
iRule Support Team Oct 03, 2018 05:47PM EDT Builder & App Support Support
Well... Yes and no. What do other feedback types look like? Volume, Mute, etc.

If \x04 represents the Power command/feedback, you can do the following:

STARTS WITH blank
PREFIX *\x04
SUFFIX blank
Have 2 Value items, one for Power On with Target Value \x01 and Replace With ON and second for Power Off with Target Value \x00 and Replace With OFF.
Up 0 rated Down
Talisson Souza Oct 03, 2018 06:18PM EDT

Input:

02 0D 86 01 00 00 00 00 32 32 32 00 06 = INPUT 1

02 0D 86 01 00 00 00 00 32 32 32 01 06 = INPUT 2

ZONE:

02 0D 86 01 01 00 00 00 32 32 32 01 06 = ZONE 1 ON

02 0D 86 01 01 00 01 01 32 32 32 01 06 = ZONE 1 OFF

02 0D 86 02 01 00 00 00 32 32 32 01 06 = ZONE 2 ON

02 0D 86 02 01 00 01 01 32 32 32 01 06 = ZONE 2 OFF
Up 0 rated Down
Talisson Souza Oct 03, 2018 06:52PM EDT

VOLUME:

02 0D 86 02 00 00 00 00 32 32 32 03 06 = VOL 00%

02 0D 86 02 01 01 00 00 32 32 32 03 06 = VOL 01%

02 0D 86 02 02 02 00 00 32 32 32 03 06 = VOL 02%

ONLY THAT. :)

FEEDBACK ON / OFF IS OK

THE VOLUME I WILL DO IN SLIDER, HOW WOULD THE FEEDBACK FIT?

FOR THE INPUT ALSO, ZONE 1 AND ZONE 2


THANKS FULL
Up 0 rated Down
iRule Support Team Oct 03, 2018 09:57PM EDT Builder & App Support Support
I need protocol documentation for this device. Can you provide that?

Post Your Public Answer

Your name (required)
Your email address (required)
Answer (required)

Recent Discussions

Ajax-loader-small
customer-service@iruleathome.com
https://cdn.desk.com/
false
iruleathome
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
true
Invalid characters found
/customer/en/portal/articles/autocomplete
There was an error contacting Get Satisfaction
View All
0
discussions
replies
Questions
Ideas
Problems
Praise