This tutorial will walk you through the setup process of the Leviton Z-Wave module
In order to program your Leviton system you will require the Leviton VRC0P-1LW Vizia RF + Plug-In Serial Interface. The Leviton Z-Wave requires additional serial hardware for control as well.
Step 1: Choose the panel that you would like to add the lighting module
Step 2: Drag & Drop the module element from the More Tab
Step 3 & 4: Label the Node ID as well as the Module element
Step 5: Save & Sync
Step 6: Gateway configuration
You will need an RS232 gateway configured for your Leviton Z-Wave module. Attach the device to the gateway and enter the Panel with the module elements!